ASTM A350 LF2 Flanges

Specification-ASTM A350 LF2 Flanges

Standards	ANSI/ASME B16.5, B16.48, ANSI Flanges, GOST Flanges, DIN Flanges, EN-1092, B16.47 Series A & B, ASME Flanges, EN Flanges, AWWA Flanges, BS Flanges.
JIS Standard	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
DIN FLANGES	DIN 2527, 2627, 2631, 2656, 2576, 2673, 2629, 2628, 2566, 2641, 2637, 2655, 2634, 2636, 2632, 2633, 2638, 2642, 2573, 2635.
Pressure Rating	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Types	Threaded, Plate, Screwed, Forged.
Supporting material	Gasket, Ring Joint, Flange Bolts
Size range	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Production technique	Forged, machined and Heat treated
Available Flange Type	Weld Neck Flanges, RTJ Flanges, Slip On Flanges, Spectacle Blind Flanges, Flanges Gaskets, Square Flanges, Standard Insert Flanges, High Hub Blinds Flanges, Flat Flanges, forged flanges, Weldo / Nipo Flanges, Jacket Insert Flanges, Tongue groove Flanges, Blind Flanges, Socket Weld Flanges, Large diameter Flanges, Long Weld Neck Flanges, Spacer Blinds, SWRF Flanges, SORF Flanges, Angle Face Rings Flanges, Spades Ring Spacers Flanges, WNRF Flanges, Screwed Flanges, Insert Flanges, flanges bolts, cf flange, Lap Joint Flanges, ASME B16.36 Orifice Flanges, Plate Flange, Expander Flanges, Ring Type Joint Flanges, Loose Flanges, Reducing Flanges, puddle flange, Threaded Flanges, blank flange, vacuum flange.
Connect Type/ Flange Face Type	Ring Type Joint (RTJ), Flat Face (FF), Tongue & Groove, Small Male-Female (SMF), Lap-Joint Face (LJF), Raised Face (RF), Large Male-Female (LMF), Small Tongue.
Custom design	As per your drawing
Test	Direct-reading Spectrograph, X-ray detector, UItrasonic flaw detector, Magnetic particle detector, Hydrostatic testing machine.
Origin	Indian / USA / Korean / West Europe / Japan
Pressure Class	PN 6 TO PN 100
Thickness	Normal Pipe Size ≤ 18
Bore Diameter	Normal Pipe ≤ 10
High Temperature	Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
Low Temperature	Above -29 Degree C (−20°F)
Coating/Surface Treatment:	Zinc Plated, Anti-rust Paint, Oil Black Paint, Yellow Transparent, Cold and Hot Dip Galvanized.
European/African/Russian Standard Flanges	Available
Gaskets Types	Full Face, Metallic Ring, Flat Ring Gasket
Marking Standard	Name of Manufacturer
	Schedule
	Type of Flange Facing
	Pressure Class
	Nominal Pipe Size, etc
Test Certificates	EN 10204/3.1B, NACE MR0103, NACE MR0175
	Raw Materials Certificate
	100% Radiography Test Report
	Third Party Inspection Report, etc

Flange Type Available

ASTM A350 Lf2 Class 1-Equivalent Grade

Group Of Material	Common Name Of Material	Type Of Material	UNS	Forging Spec.	Casting Spec. Equivalent	DIN	DIN W. No	Application
Carbon Steel (CS)	CS	C-Si	K03504	A105	A216-WCB	C22.8 DIN 17243	1.0460	General non-corrosive service from -29ºC (-20ºF) to 425ºC (800ºF)
Low Temperature Carbon Steel (LTCS)	LTCS	C-Mn-Fe	K03011	A350-LF2	A352-LCB A352-LCC	TSTE 355 DIN 18103	1.0566	General non-corrosive service from -46ºC (-50ºF) to 340ºC (650ºF), LF2 -46ºC ~ 425ºC
Low Temperature Alloy Steel (LTAS)	Nickel Steel	3.1/2Ni	K32025	A350-LF3	A352-LC3	10Ni14	1.5637	-101ºC (150ºF) to 340ºC (650ºF)

Chemical and Mechanical Properties

Chemical Composition		Mechanical Properties
C 0.30 Maximum	TS Min psi (Mpa)	70,000 (485)
Mn 0.60 – 1.35	YS Min psi (Mpa)	36,000 (250)
Si 0.15 – 0.30	EL (2″ Min)	22%
P 0.035 Maximum	RA Min	30%
S 0.040 Maximum	Hardness, Bhn	Maximum 197
Cr 0.30 Maximum	-50ºF Charpy	Min Impact
Ni 0.40 Maximum	Energy F t/Lb (J):-
Mo 0.12 Maximum	Set of 3 Specimen*	15 (20)
V 0.08 Maximum	For One Specimen	12 (16)
Cb 0.02 Maximum
Cu 0.04 Maximum
Pb 0.02 Maximum
Total Residuals = 0.50

LTCS A350 LF2 Flanges Thickness Calculation

ASTM A350 LF2 Flanges Wall Thickness
NPS (Normal Pipe Sizes)	Outside Daimeter (O.D.)	Schedule 10	Schedule 20	Schedule 30	STD Wall	Schedule 40	Schedule 60	EXT Hvy	Schedule 80	Schedule 100	Schedule 120	Schedule 140	Schedule 160	XX Hvy
½	0.84	0.083	...	...	0.109	0.109	...	0.147	0.147	...	...	...	0.188	0.294
¾	1.05	0.083	...	...	0.113	0.113	...	0.154	0.154	...	...	...	0.219	0.308
1	1.315	0.109	...	...	0.133	0.133	...	0.179	0.179	...	...	...	0.25	0.358
1 ¼	1.66	0.109	...	...	0.14	0.14	...	0.191	0.191	...	...	...	0.25	0.382
1 ½	1.9	0.109	...	...	0.145	0.145	...	0.2	0.2	...	...	...	0.281	0.4
2	2.375	0.109	...	...	0.154	0.154	...	0.218	0.218	...	...	...	0.344	0.436
2 ½	2.875	0.12	...	...	0.203	0.203	...	0.276	0.276	...	...	...	0.375	0.552
3	3.5	0.12	...	...	0.216	0.216	...	0.3	0.3	...	...	...	0.438	0.6
3 ½	4	0.12	...	...	0.226	0.226	...	0.318	0.318	...	...	...	...	0.636
4	4.5	0.12	...	...	0.237	0.237	...	0.337	0.337	...	0.438	...	0.531	0.674
5	5.563	0.134	...	...	0.258	0.258	...	0.375	0.375	...	0.5	...	0.625	0.75
6	6.625	0.134	...	...	0.28	0.28	...	0.432	0.432	...	0.562	...	0.719	0.864
8	8.625	0.148	0.25	0.277	0.322	0.322	0.406	0.5	0.5	0.594	0.719	0.812	0.906	0.875
10	10.75	0.165	0.25	0.307	0.365	0.365	0.5	0.5	0.594	0.719	0.844	1	1.125	1
12	12.75	0.18	0.25	0.33	0.375	0.406	0.562	0.5	0.688	0.844	1	1.125	1.312	1
14	14	0.25	0.312	0.375	0.375	0.438	0.594	0.5	0.75	0.938	1.094	1.25	1.406	...
16	16	0.25	0.312	0.375	0.375	0.5	0.656	0.5	0.844	1.031	1.219	1.438	1.594	...
18	18	0.25	0.312	0.438	0.375	0.562	0.75	0.5	0.938	1.156	1.375	1.562	1.781	...
20	20	0.25	0.375	0.5	0.375	0.594	0.812	0.5	1.031	1.281	1.5	1.75	1.969	...
22	22	0.25	...	...	0.375	...	...	0.5	...	...	....	....	....	....
24	24	0.25	0.375	0.562	0.375	0.688	0.969	0.5	1.219	1.531	1.812	2.062	2.344	....
26	26	....	....	....	0.375	....	....	0.5	....	....	....	....	....	....
30	30	0.312	0.5	0.625	0.375	....	....	0.5	....	....	....	....	....	....
36	36	0.312	0.5	0.625	0.375	0.75	....	0.5	....	....	....	....	....	....
40	40	....	....	....	0.375	....	....	0.5	....	....	....	....	....	....
42	42	……..	……..	……..	0.375	……..	……..	0.5	……..	……..	……..	……..	……..	……..
48	48	……..	……..	……..	0.375	……..	……..	0.5	……..	……..	……..	……..	……..	……..

ASME SA 350 GR LF2 Bolt Chart

	Class 150 Flanges				Class 300 Flanges				Class 600 Flanges
NPS	# Bolts And Studs	Diameter of Bolts And Studs	Stud Length		# Bolts And Studs	Diameter of Bolts And Studs	Stud Length		# Bolts And Studs	Diameter of Bolts And Studs	Stud Length
			1/16 RF	RTJ			1/16 RF	RTJ			1/4 RF	RTJ
1/2	4	0.50	2-1/4	–	4	0.50	2-1/2	3	4	0.50	3	3
3/4	4	0.50	2-1/2	–	4	0.63	3	3-1/2	4	0.63	3-1/2	3-1/2
1	4	0.50	2-1/2	3	4	0.63	3	3-1/2	4	0.63	3-1/2	3-1/2
1-1/4	4	0.50	2-3/4	3-1/4	4	0.63	3-1/4	3-3/4	4	0.63	3-3/4	3-3/4
1-1/2	4	0.50	2-3/4	3-1/4	4	0.75	3-1/2	4	4	0.75	4-1/4	4-1/4
2	4	0.63	3-1/4	3-3/4	8	0.63	3-1/2	4	8	0.63	4-1/4	4-1/4
2-1/2	4	0.63	3-1/2	4	8	0.75	4	4-1/2	8	0.75	4-3/4	4-3/4
3	4	0.63	3-1/2	4	8	0.75	4-1/4	4-3/4	8	0.75	5	5
3-1/2	8	0.63	3-1/2	4	8	0.75	4-1/4	5	8	0.88	5-1/2	5-1/2
4	8	0.63	3-1/2	4	8	0.75	4-1/2	5	8	0.88	5-3/4	5-3/4
5	8	0.75	3-3/4	4-1/4	8	0.75	4-3/4	5-1/4	8	1.00	6-1/2	6-1/2
6	8	0.75	4	4-1/2	12	0.75	4-3/4	5-1/2	12	1.00	6-3/4	6-3/4
8	8	0.75	4-1/4	4-3/4	12	0.88	5-1/2	6	12	1.13	7-1/2	7-3/4
10	12	0.88	4-1/2	5	16	1.00	6-1/4	6-3/4	16	1.25	8-1/2	8-1/2
12	12	0.88	4-3/4	5-1/4	16	1.13	6-3/4	7-1/4	20	1.25	8-3/4	8-3/4
14	12	1.00	5-1/4	5-3/4	20	1.13	7	7-1/2	20	1.38	9-1/4	9-1/4
16	16	1.00	5-1/4	5-3/4	20	1.25	7-1/2	8	20	1.50	10	10
18	16	1.13	5-3/4	6-1/4	24	1.25	7-3/4	8-1/4	20	1.63	10-3/4	10-3/4
20	20	1.13	6-1/4	6-3/4	24	1.25	8	8-3/4	24	1.63	11-1/4	11-1/2
24	20	1.25	6-3/4	7-1/4	24	1.50	9	10	24	1.88	13	13-1/4

Low Temperature Carbon Steel Gasket Size Chart

NPS	Gasket I.D.	Gasket O.D.
NPS	Gasket I.D.	Class 150	Class 300	Class 400	Class 600	Class 900
1/2	0.84	1.875	2.125	2.125	2.125	2.50
3/4	1.06	2.25	2.625	2.625	2.625	2.75
1	1.31	2.625	2.875	2.875	2.875	3.125
1 1/4	1.66	3	3.25	3.25	3.25	3.50
1 1/2	1.91	3.375	3.75	3.75	3.75	3.875
2	2.38	4.125	4.375	4.375	4.375	5.625
2 1/2	2.88	4.875	5.125	5.125	5.125	6.50
3	3.50	5.375	5.875	5.875	5.875	6.625
4	4.50	6.875	7.125	7.00	7.625	8.125
5	5.56	7.75	8.50	8.375	9.50	9.75
6	6.62	8.75	9.875	9.75	10.50	11.375
8	8.62	11	12.125	12.00	12.625	14.125
10	10.75	13.375	14.25	14.125	15.75	17.125
12	12.75	16.125	16.625	16.50	18.00	19.625

A350 Lf2 Pressure-Temperature Rating

TEMP °C	Class 150	Class 300	Class 400	Class 600	Class 900	Class 1500	Class 2500
-29 TO 38	19.6	51.1	68.1	102.1	153.2	255.3	425.5
50	19.2	50.1	66.8	100.2	150.4	250.6	417.7
100	17.7	46.6	62.1	93.2	139.8	233	388.3
150	15.8	45.1	60.1	90.2	135.2	225.4	375.6
200	13.8	43.8	58.4	87.6	131.4	219	365
250	12.1	41.9	55.9	83.9	125.8	209.7	349.5
300	10.2	39.8	53.1	79.6	119.5	199.1	331.8
325	9.3	38.7	51.6	77.4	116.1	193.6	322.6
350	8.4	37.6	50.1	75.1	112.7	187.8	313
375	7.4	36.4	48.5	72.7	109.1	181.8	303.1
400	6.5	34.7	46.3	69.4	104.2	173.6	289.3
425	5.5	28.8	38.4	57.5	86.3	143.8	239.7
450	4.6	23	30.7	46	69	115	191.7
475	3.7	17.4	23.2	34.9	52.3	87.2	145.3
500	2.8	11.8	15.7	23.5	35.3	58.8	97.9
538	1.4	5.9	7.9	11.8	17.7	29.5	49.2

Flanges Dimensions Class-900

Nominal Pipe Size NPS (inches)	Class 900
Nominal Pipe Size NPS (inches)	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	4-3/4	4	3/4	0.88	3-1/4
3/4	5-1/8	4	3/4	0.88	3-1/2
1	5-7/8	4	7/8	1	4
1-1/4	6-1/4	4	7/8	1	4-3/8
1-1/2	7	4	1	1.12	4-7/8
2	8-1/2	8	7/8	1	6-1/2
2-1/2	9-5/8	8	1	1.12	7-1/2
3	9-1/2	8	7/8	1	7-1/2
4	11-1/2	8	1-1/8	1.25	9-1/4
5	13-3/4	8	1-1/4	1.38	11
6	15	12	1-1/8	1.25	12-1/2
8	18-1/2	12	1-3/8	1.5	15-1/2
10	21-1/2	16	1-3/8	1.5	18-1/2
12	24	20	1-3/8	1.5	21
14	25-1/4	20	1-1/2	1.62	22
16	27-3/4	20	1-5/8	1.75	24-1/2
18	31	20	1-7/8	2	27
20	33-3/4	20	2	2.12	29-1/2
24	41	20	2-1/2	2.62	35-1/2

ANSI B16.5 A350 Gr Lf2 Flanges Dimensions Class-2500

Nominal Pipe Size NPS (inches)	Class 2500
Nominal Pipe Size NPS (inches)	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	5-1/4	4	3/4	0.88	3-1/2
3/4	5-1/2	4	3/4	0.88	3-3/4
1	6-1/4	4	7/8	1	4-1/4
1-1/4	7-1/4	4	1	1.12	5-1/8
1-1/2	8	4	1-1/8	1.25	5-3/4
2	9-1/4	8	1	1.12	6-3/4
2-1/2	10-1/2	8	1-1/8	1.25	7-3/4
3	12	8	1-1/4	1.38	9
4	14	8	1-1/2	1.62	10-3/4
5	16-1/2	8	1-3/4	1.88	12-3/4
6	19	8	2	2.12	14-1/2
8	21-3/4	12	2	2.12	17-1/4
10	26-1/2	12	2-1/2	2.62	21-1/4
12	30	12	2-3/4	2.88	24-3/8

Application

Food & Beverage
Paper Industry
Pharmaceutical
Hospital Equipment
Textiles
Dairy
Aircraft
Chemicals
Others Parts in Machinery

Testing

Hydrostatic Test
Macro Test
Ultra Sonic Test (UT)
Micro Test
Hardness Test
Radiography Test
Pitting Resistance Test
PMI Testing
Mechanical Testing
X-ray detector

Packing

Wooden Boxes
Shrink-Wrapped
Carton Boxes
Wooden Crates
Wooden Pallets

ASTM A350 LF2 Flanges

Specification-ASTM A350 LF2 Flanges

Flange Type Available

Slip on

Weldo

Weld Neck

Tongue Groove

Spectacle Blind

Spade

Threaded Screwed

Square

Ring Type Joint

Ring Spacer

SocketWeld

Reducing

Raised Face

Puddle

Plate

Orifice

Nippo

Male Female

Long Weld Neck

Lap Joint

ASTM A350 Lf2 Class 1-Equivalent Grade

Chemical and Mechanical Properties

LTCS A350 LF2 Flanges Thickness Calculation

ASME SA 350 GR LF2 Bolt Chart

Low Temperature Carbon Steel Gasket Size Chart

A350 Lf2 Pressure-Temperature Rating

Flanges Dimensions Class-900

ANSI B16.5 A350 Gr Lf2 Flanges Dimensions Class-2500

Application

Testing

Packing

Stainless Steel Flanges

Materials

For Business Dealing:

Address

Email